Keine exakte Übersetzung gefunden für مضخة التدفق

Frage & Antwort
Textübersetzung
Übersetzung einfügen
Senden

Übersetzen Englisch Arabisch مضخة التدفق

Englisch
 
Arabisch
relevante Treffer

Textbeispiele
  • Well, if he injected the epi into the I.V. and then lowered the rate on the infusion pump, he would have at least ten minutes before the patient coded.
    حسناً, إذا كان قد حقن - الأدرينالين في الوريد ثم خفّض معدل التدفق على المضخة سيكون لديه على الأقل 10 دقائق
  • Pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h, or vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:
    إن المضخات التي يبلغ معدل تدفقها الأقصى 0.6 متر مكعب في الساعة طبقا لمواصفات الصانع، أو مضخات التفريغ بمعدل تدفق أقصاه 5 متر مكعب في الساعة طبقا لمواصفات الصانع (تحت درجة حرارة معيارية صفر مئوي (273 K) وضغط (101.3 kPa)، والتي تكون فيها كل الأسطح ملامسة بصورة مباشرة للمواد الكيميائية التي تتم معالجتها مصنوعة من المواد الآتية:
  • Multiple-seal and seal-less pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h, or vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:
    مضخات ذات موانع تسرب متعددة أو بدون موانع تسرب ذات معدل تدفق أقصاه 0.6 متر مكعب في الساعة طبقا لمواصفات الصانع، أو مضخات تفريغ بمعدل تدفق أقصاه 5 متر مكعب في الساعة طبقا لمواصفات الصانع (تحت درجة حرارة معيارية صفر مئوي (273 K) وضغط (101.3 kPa) وأغلفة (أجسام المضخات) وبطانات وضواغط وريش وأعمدة إدارة أو فوهات مضخات نافورية مصممة لها، تكون فيها كل الأسطح الملامسة بصورة مباشرة للكيماويات التي يتم معالجتها مصنوعة من المواد الآتية: